{"product_id":"powerbox-powercube-one","title":"Powerbox PowerCube ONE","description":"\u003cp\u003e\u003cstrong\u003ePowerCube ONE (Cube not included)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWith the \u003c\/span\u003e\u003cspan\u003ePowerCube ONE \u003c\/span\u003e\u003cspan\u003ePowerBox offers an all-in-one power supply system for the \u003c\/span\u003e\u003cspan\u003eCubePilot \u003c\/span\u003e\u003cspan\u003eflight controller, all the associated sensors, radio system and 24 high-power servos.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe two XT60 sockets are designed for the connection of rechargeable batteries or DC generator outputs. DC\/DC converters of redundant construction provide 5V power to the CUBE and its peripherals, while an additional DC\/DC circuit supplies a regulated 8V supply to the RC receiving system, the optional iGyro, GPS or True Airspeed Vario, and four servo sockets. The input voltage of 6V - 35V is available with minimal losses at all the other servo sockets. The entire power supply system is of redundant construction throughout.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eHowever, the \u003c\/span\u003e\u003cspan\u003ePowerCube ONE \u003c\/span\u003e\u003cspan\u003eoffers a great deal more: all the battery and receiver data which is gathered by the \u003c\/span\u003e\u003cspan\u003ePowerCube ONE \u003c\/span\u003e\u003cspan\u003eare passed via the CAN bus to the CUBE, where the information can be used for flight control, or alternatively simply sent to the ground via the MAV-LINK interface and RC telemetry.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe RC receiver connected to the system (P²-BUS\/EX-BUS\/S.BUS2\/SRXL2) can be used by the radio control system to activate a by-pass, which circumvents the \u003c\/span\u003e\u003cspan\u003eCubePilot \u003c\/span\u003e\u003cspan\u003econtrol system. In by-pass mode it is possible with a fixed-wing aircraft to revert to proven iGyro technology, which is easy to set up. This enormously reduces the load on the pilot during manual take-off and landing during the set-up and parameter adjustment phases of the \u003c\/span\u003e\u003cspan\u003eCubePilot \u003c\/span\u003e\u003cspan\u003eflight controller.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e+ All-in-one power supply system for the CubePilot flight controller\u003cbr\u003e+ High-performance dual power supply with high continuous current delivery\u003cbr\u003e+ Low-loss 6-35V power supply for servos connected to the system\u003cbr\u003e+ 40A brief maximum current load (10s)\u003cbr\u003e+ 20A continuous load\u003cbr\u003e+ 8A continuous load for the regulated 8V outputs\u003cbr\u003e+ High-performance 5V\/3A power supply for the CubePilot and peripherals\u003cbr\u003e+ Consistent dual construction of the high-power electronics\u003cbr\u003e+ Redundant electronic switch\u003cbr\u003e+ 26 channels (S.BUS: limited to 16)\u003cbr\u003e+ 22 freely assignable servo outputs\u003cbr\u003e+ CAN-BUS connection to the CubePilot system\u003cbr\u003e+ Availability of all telemetry data for the CubePilot\u003cbr\u003e+ Telemetry data for the RC system (P²-BUS\/S.BUS2\/SRXLS2\/EX-BUS\/HoTT\/M-Link)\u003cbr\u003e+ By-pass function for the controller\u003cbr\u003e+ Servo-matching for all 22 outputs\u003cbr\u003e+ Auto-matching function\u003cbr\u003e+ 2 independent door sequencers with set-up assistant\u003cbr\u003e+ Latest type of integral iGyro technology, with iGyro SAT as gyro sensor\u003cbr\u003e+ 12 independent gyro outputs for: 4x aileron, 4x elevator, 4x rudder\u003cbr\u003e+ All 12 gyro outputs with individual gain control\u003cbr\u003e+ Graphic menu representation for ultra-simple programming\u003cbr\u003e+ Sophisticated assistant for fast initial set-up\u003cbr\u003e+ Optional use with GPS-V or PBS-TAV for speed-dependent gyro compensation (by-pass mode only)\u003cbr\u003e+ Virtually every aspect can be operated from PowerBox and Jeti transmitters\u003cbr\u003e+ User-selectable servo frame rate: 10 ms, 12 ms, 14 ms, 16 ms, 18 ms\u003cbr\u003e+ Suppression of servo feedback currents\u003cbr\u003e+ 2.4” TFT screen, legible in sunlight\u003cbr\u003e+ Bi-lingual menu system\u003cbr\u003e+ Latest 32-bit micro-processor for precise high-speed signal processing\u003cbr\u003e+ Optimised heat dissipation via high-performance machined metal heat-sink\u003cbr\u003e+ Machined, anodised aluminium switch and screen case\u003cbr\u003e+ Compact dimensions (137 x 84 x 31 mm)\u003cbr\u003e+ Weight only 170 g (without Cube)\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\n\u003cspan\u003eData\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eOperating voltage    6.0V - 35.0V\u003cbr\u003ePower supply    3-8S LiPo, Li-lon or DC from a generator\u003cbr\u003eCurrent drain Power-on state    75mA at 20V\u003cbr\u003eCurrent drain Standby    40μA\u003cbr\u003eDropout voltage    0.35V\u003cbr\u003eOutput voltage    8.0V\u003cbr\u003eMaximum current continuous    2x 20A\u003cbr\u003eMaximum current peak    2x 40A (\u0026lt; 10 s)\u003cbr\u003eSignal input    Serial\u003cbr\u003eSupported RC systems    PowerBox, Futaba, Jeti, Spektrum, M-Link, Hott\u003cbr\u003eSupported telemetry systems    P²BUS, S.BUS2, EX-Tele, SRXL2\u003cbr\u003eChannels    26\u003cbr\u003eServo sockets    22\u003cbr\u003eServo signal resolution    0.25 μs\u003cbr\u003eGyro sensor type    External iGyro SAT\u003cbr\u003ePWM framerate    10 ms, 12 ms, 14 ms, 16 ms, 18 ms\u003cbr\u003eNumber of sensor axes    12\u003cbr\u003eDimensions    137 x 84 x 31 mm\u003cbr\u003eWeight    170 g (without Cube)\u003cbr\u003eWeight Switch    15 g\u003cbr\u003eWeight Screen    34 g\u003cbr\u003eTemperature range    -30°C to +85°C\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eSet Contents\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e+ PowerCube ONE (orange cube not included)\u003cbr\u003e+ TFT-Display\u003cbr\u003e+ SensorSwitch\u003cbr\u003e+ 2 patch-leads\u003cbr\u003e+ 4 rubber grommets and brass spacer sleeves\u003cbr\u003e+ 8 retaining screws\u003cbr\u003e+ Operating instructions in English\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"PowerBox-Americas","offers":[{"title":"Default Title","offer_id":51996282781970,"sku":null,"price":1199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/4442\/0416\/files\/PowerCube_One_01_Hauptbild.png?v=1770062873","url":"https:\/\/www.powerbox-americas.com\/products\/powerbox-powercube-one","provider":"PowerBox-Americas","version":"1.0","type":"link"}